Cultivator penyemaian Verti-till turbo cultivator Green Wave 11.7 m baru

PDF
Cultivator penyemaian Verti-till turbo cultivator Green Wave 11.7 m baru - Agronetto
Cultivator penyemaian Verti-till turbo cultivator Green Wave 11.7 m baru | Gambar 1 - Agronetto
Cultivator penyemaian Verti-till turbo cultivator Green Wave 11.7 m baru | Gambar 2 - Agronetto
Cultivator penyemaian Verti-till turbo cultivator Green Wave 11.7 m baru | Gambar 3 - Agronetto
Cultivator penyemaian Verti-till turbo cultivator Green Wave 11.7 m baru | Gambar 4 - Agronetto
Cultivator penyemaian Verti-till turbo cultivator Green Wave 11.7 m baru | Gambar 5 - Agronetto
Cultivator penyemaian Verti-till turbo cultivator Green Wave 11.7 m baru | Gambar 6 - Agronetto
Cultivator penyemaian Verti-till turbo cultivator Green Wave 11.7 m baru | Gambar 7 - Agronetto
Cultivator penyemaian Verti-till turbo cultivator Green Wave 11.7 m baru | Gambar 8 - Agronetto
Cultivator penyemaian Verti-till turbo cultivator Green Wave 11.7 m baru | Gambar 9 - Agronetto
Tertarik dengan iklan?
1/9
PDF
Harga:
berdasarkan pemintaan
Buat penawaran harga
Hubungi penjual
Lokasi: Ukraina m.Dnipro8446 km to "United States/Columbus"
ID stok penjual: 10288
Dipasang pada: lebih dari 1 bulan
Deskripsi
Lebar kerja: 11,7 m
Kondisi
Kondisi: baru

Detail selengkapnya — Cultivator penyemaian Verti-till turbo cultivator Green Wave 11.7 m baru

In the presence of units with different working widths: 2.6 m, 3.9 m, 5.2 m, 6.5 m, 7.8 m, 9.1 m, 10.4 m, 11.7 m, 18.2 m.
Designed for various types of autumn-spring field work:


field work with a lot of crop residues;
crushing of a solid surface soil layer;
application and mixing of herbicides, compost and fertilizers;
preparation of the field, seed bed with traditional, preserving and zero technologies.


Advantages and design features of the Green Wave vertical tillage turbo cultivator with a working width of 11.7 m:


it is used in various soil and climatic zones when treating soils of different mechanical composition with moisture up to 28% and hardness up to 3.5 MPa (35 kg / cm²), not clogged with stones, flagstone and other obstacles;
it is aggregated with wheel and caterpillar tractors with engine power corresponding to the width of a particular model;
It is a trailed machine, it is controlled and serviced by one person (tractor driver);
the working bodies of the turbo cultivator are 13-wave turbo discs mounted on spring blocks;
vertical vibration of turbo discs affects the earth like a jackhammer, crushing the soil below the working depth level, breaking soil compaction and creating conditions for the accumulation and preservation of soil moisture;
when working on very heavy soils, it is possible to install discs at an angle in the range from 0 ° to 6 °. This makes it possible to better loosen and level the soil in difficult conditions;
spring blocks mounted on the frame in a checkerboard pattern, for better passage of crop residues;
equipped with a 3-row flex harrow and a spiral-shaped ribbed roller for even distribution of crop residues and crumbling of soil lumps;
the transfer of the turbo cultivator from the working position to the transport one, and vice versa, is carried out using hydraulic drives. In the parking position, the turbo cultivator is installed on the parking jack;
to adjust the degree of impact of the train harrow on the soil and plant debris, it is possible to set two tooth positions - 50 ° and 38 °, this is achieved by reversing the sections of the train;
range of working depth 0-18 cm;
the distance between the turbo discs is 16 cm;
5 bolt reinforced hub with two sealed SKF bearings;
the force of the springs at which the operation of the safety mechanism of the safety unit begins is 500 kg
the vertical stroke of the spring unit with turbo discs for circumventing obstacles is up to 250 mm.


Basic equipment:


turbo cultivator;
wavy turbo discs 570 mm x 5 mm 13 waves (32 mm wave depth);
three-row flex harrow;
spiral-shaped ribbed roller.


Additional equipment:


tubular roller with a flex harrow;
special loaders of the unit frame, for using a turbo cultivator on heavy soils, for better penetration of discs into the soil;
wavy turbo discs 550 mm x 5 mm 8 waves (65 mm wave depth);
mechanical granular fertilizer application system (for models with a working width of 2.6 m, 3.9 m, 5.2 m).


Specifications:

Type ... trailed
Tractor hitch ... pendulum
Average speed, km / h ... 15
Working width, m ... 11.7
Working length, m ... 8.9
Length during transportation, m ... 8.9
Height during transportation, m ... 5
Width during transportation, m ... 5.5
Total weight, t ... 12.4
Number of spring blocks, pcs … 36
Number of turbo disks, pcs ... 72
The distance between the turbo disks, m ... 0.162
Depth of processing, mm ... 0-180
Depth adjustment ... set of clips 50/30/19/10 / 7mm on the rods of hydraulic cylinders
Tire Sizes:
The support wheels of the wing frames ... 10.0 / 75-15.3 (14PR)
The support wheels of the frames of the central frame ... 19.0 / 45-17 (18PR)
Tire pressure, bar ... 4-5
Hydraulic system pressure, bar ... 180
Minimum tractor power, hp ... 500
When deep processing is recommended, hp ... 550
The number of staff, people ... 1
field work with a lot of crop residues;
crushing of a solid surface soil layer;
application and mixing of herbicides, compost and fertilizers;
preparation of the field, seed bed with traditional, preserving and zero technologies.
it is used in various soil and climatic zones when treating soils of different mechanical composition with moisture up to 28% and hardness up to 3.5 MPa (35 kg / cm²), not clogged with stones, flagstone and other obstacles;
it is aggregated with wheel and caterpillar tractors with engine power corresponding to the width of a particular model;
It is a trailed machine, it is controlled and serviced by one person (tractor driver);
the working bodies of the turbo cultivator are 13-wave turbo discs mounted on spring blocks;
vertical vibration of turbo discs affects the earth like a jackhammer, crushing the soil below the working depth level, breaking soil compaction and creating conditions for the accumulation and preservation of soil moisture;
when working on very heavy soils, it is possible to install discs at an angle in the range from 0 ° to 6 °. This makes it possible to better loosen and level the soil in difficult conditions;
spring blocks mounted on the frame in a checkerboard pattern, for better passage of crop residues;
equipped with a 3-row flex harrow and a spiral-shaped ribbed roller for even distribution of crop residues and crumbling of soil lumps;
the transfer of the turbo cultivator from the working position to the transport one, and vice versa, is carried out using hydraulic drives. In the parking position, the turbo cultivator is installed on the parking jack;
to adjust the degree of impact of the train harrow on the soil and plant debris, it is possible to set two tooth positions - 50 ° and 38 °, this is achieved by reversing the sections of the train;
range of working depth 0-18 cm;
the distance between the turbo discs is 16 cm;
5 bolt reinforced hub with two sealed SKF bearings;
the force of the springs at which the operation of the safety mechanism of the safety unit begins is 500 kg
the vertical stroke of the spring unit with turbo discs for circumventing obstacles is up to 250 mm.
turbo cultivator;
wavy turbo discs 570 mm x 5 mm 13 waves (32 mm wave depth);
three-row flex harrow;
spiral-shaped ribbed roller.
tubular roller with a flex harrow;
special loaders of the unit frame, for using a turbo cultivator on heavy soils, for better penetration of discs into the soil;
wavy turbo discs 550 mm x 5 mm 8 waves (65 mm wave depth);
mechanical granular fertilizer application system (for models with a working width of 2.6 m, 3.9 m, 5.2 m).
Tampilkan seluruh komentar
Penting
Penawaran ini hanya sebagai pedoman. Silakan tanyakan informasi secara persis dari penjual.
Tips pembelian
Tips keamanan
Verifikasi Penjual

Jika Anda memutuskan untuk membeli peralatan dengan harga yang rendah, pastikan Anda berkomunikasi dengan penjual yang sebenarnya. Cari tahu informasi sebanyaknya tentang pemilik peralatan. Salah satu cara untuk mengetahuinya adalah dengan merepresentasikan diri Anda sendiri sebagai perusahaan. Jika ada yang mencurigakan, beri tahu kami untuk dikontrol lebih lanjut melalui formulir masukan.

Pemeriksaan Harga

Sebelum memutuskan untuk membeli, pelajari secara saksama beberapa penawaran untuk mengetahui biaya rata-rata dari peralatan yang dipilih. Jika harga penawaran yang Anda pilih jauh lebih rendah daripada penawaran yang serupa, pikirkan kembali. Perbedaan harga yang signifikan mungkin menunjukkan ada sesuatu yang disembunyikan atau penjual mencoba berbuat curang.

Jangan membeli produk yang harganya berbeda jauh dari harga rata-rata untuk peralatan serupa.

Jangan menyetujui jaminan yang meragukan dan barang harus dibayarkan di muka. Jika ragu, jangan takut untuk mencari tahu secara mendetail, minta foto dan dokumen tambahan untuk peralatan, periksa keabsahan dokumen, ajukan pertanyaan.

Pembayaran di muka yang meragukan

Jenis penipuan yang paling umum. Penjual yang tidak jujur mungkin meminta sejumlah uang untuk pembayaran di muka sebagai “booking” atas pembelian peralatan oleh Anda. Setelah mengumpulkan banyak uang, ia menghilang dan tidak bisa lagi dihubungi.

Berbagai jenis penipuan di antaranya:
  • Mentransfer pembayaran di muka ke kartu
  • Jangan melakukan pembayaran di muka tanpa dokumen yang menyatakan proses transfer uang, jika selama komunikasi penjual tampak meragukan.
  • Mentransfer ke akun "Tepercaya"
  • Permintaan seperti ini seharusnya sebagai indikasi, kemungkinan besar Anda sedang berkomunikasi dengan penipu.
  • Mentransfer ke akun perusahaan dengan nama yang sama
  • Berhati-hatilah, penipu mungkin akan berpura-pura sebagai perusahaan terkenal dengan membuat perubahan kecil pada nama. Jangan mentransfer uang jika nama perusahaan meragukan.
  • Penggantian detail pada faktur dari perusahaan sebenarnya
  • Sebelum melakukan transfer, pastikan detail yang disebutkan benar, dan apakah terkait dengan perusahaan tersebut.
Melihat ada kecurangan?
Beri tahu kami
Tips keamanan
PDF
Menjual mesin atau kendaraan?
Anda dapat melakukannya dengan kami!
Iklan yang serupa
€71.890 UAH 3.465.000 ≈ US$83.700
Lebar kerja 18,3 m Kedalaman operasi 180 mm Daya traktor yang dibutuhkan 450 HP
Ukraina, m.Dnipro
AVERS-AGRO
5 tahun di Agronetto
Hubungi penjual
€48.230 UAH 2.325.000 ≈ US$56.150
Ukraina, m.Dnipro
AVERS-AGRO
5 tahun di Agronetto
Hubungi penjual
Harga berdasarkan permintaan
Lebar kerja 7,5 m Daya traktor yang dibutuhkan 200 HP
Ukraina, m.Dnipro
AVERS-AGRO
5 tahun di Agronetto
Hubungi penjual
cultivator penyemaian Cultivator of overall tillage Green Scraper 9.5 m baru cultivator penyemaian Cultivator of overall tillage Green Scraper 9.5 m baru
2
Harga berdasarkan permintaan
Ukraina, m.Dnipro
AVERS-AGRO
5 tahun di Agronetto
Hubungi penjual
Harga berdasarkan permintaan
Lebar kerja 8 m Kedalaman operasi 140 mm Kapasitas 9,5 ha/jam Daya traktor yang dibutuhkan 200 HP
Ukraina, m.Dnipro
AVERS-AGRO
5 tahun di Agronetto
Hubungi penjual
Harga berdasarkan permintaan
Ukraina, m.Dnipro
AVERS-AGRO
5 tahun di Agronetto
Hubungi penjual
€12.870 UAH 620.200 ≈ US$14.980
Lebar kerja 6 m Kedalaman operasi 150 mm Kapasitas 7 ha/jam Daya traktor yang dibutuhkan 150 HP
Ukraina, m.Dnipro
AVERS-AGRO
5 tahun di Agronetto
Hubungi penjual
cultivator penyemaian Surface and mid-depth cultivator Green Tiller 9,15 m baru cultivator penyemaian Surface and mid-depth cultivator Green Tiller 9,15 m baru cultivator penyemaian Surface and mid-depth cultivator Green Tiller 9,15 m baru
3
Harga berdasarkan permintaan
Lebar kerja 9,15 m
Ukraina, m.Dnipro
AVERS-AGRO
5 tahun di Agronetto
Hubungi penjual
cultivator penyemaian Kongskilde cultivator penyemaian Kongskilde cultivator penyemaian Kongskilde
3
US$15.000 ≈ €12.880 ≈ Rp 244.600.000
Ukraina, Dunaivtsi
Kozacka dolina 2006
5 tahun di Agronetto
Hubungi penjual
US$16.500 ≈ €14.170 ≈ Rp 269.100.000
2015
Ukraina, Dobrovodi
TOV "MRIYa SERVIS"
3 tahun di Agronetto
Hubungi penjual
roller pertanian Lemken
1
Harga berdasarkan permintaan
2010
Lebar kerja 6 m
Ukraina, Kyiv
Prodazh tehniki
3 tahun di Agronetto
Hubungi penjual
US$19.900 ≈ €17.090 ≈ Rp 324.600.000
2013
Lebar kerja 9,3 m Kapasitas 8 ha/jam Daya traktor yang dibutuhkan 250 HP
Ukraina, Terebovlia
PP Vivchar
10 tahun di Agronetto
Hubungi penjual
US$16.000 ≈ €13.740 ≈ Rp 261.000.000
2015
Ukraina, Tinna
TOV "MRIYa SERVIS"
3 tahun di Agronetto
Hubungi penjual
€8.000 ≈ US$9.314 ≈ Rp 151.900.000
2006
Lebar kerja 6 m Daya traktor yang dibutuhkan 180 HP
Ukraina, Bakhmach
TOV "GOLD-NAFTA"
4 tahun di Agronetto
Hubungi penjual
€41.000 ≈ US$47.740 ≈ Rp 778.600.000
2024
Lebar kerja 6 m Kedalaman operasi 20 mm Daya traktor yang dibutuhkan 200 HP
Ukraina, Lutsk
TzOV Zahid-Agro-Tehnika
8 tahun di Agronetto
Hubungi penjual
€26.560 UAH 1.280.000 ≈ US$30.920
2023
Lebar kerja 6 m Kedalaman operasi 120 mm Daya traktor yang dibutuhkan 230 HP
Ukraina, m. Kropivnitskiy
TOV "ARK-GRUPP"
1 tahun di Agronetto
Hubungi penjual
€18.460 UAH 890.000 ≈ US$21.500
2023
Lebar kerja 4 m Kedalaman operasi 120 mm Daya traktor yang dibutuhkan 140 HP
Ukraina, m. Kropivnitskiy
TOV "ARK-GRUPP"
1 tahun di Agronetto
Hubungi penjual
€34.230 UAH 1.650.000 ≈ US$39.860
2023
Lebar kerja 8 m Kedalaman operasi 120 mm Daya traktor yang dibutuhkan 280 HP
Ukraina, m. Kropivnitskiy
TOV "ARK-GRUPP"
1 tahun di Agronetto
Hubungi penjual
US$18.000 ≈ €15.460 ≈ Rp 293.600.000
2008
Ukraina, Podvirne
TOV "MRIYa SERVIS"
3 tahun di Agronetto
Hubungi penjual
US$10.500 ≈ €9.018 ≈ Rp 171.300.000
Lebar kerja 4 m
Ukraina, Terebovlia
PP Vivchar
10 tahun di Agronetto
Hubungi penjual